Part reference

Pleatco PCC80-PAK4

The Pleatco PCC80-PAK4 is the four-pack of the PCC80 replacement cartridge for the Clean & Clear Plus 320 filter system.

PCC80-PAK4 is the Pleatco part number for the four-pack of the PCC80 cartridge. PAK4 means a set of four. Each cartridge in the pack is a standard PCC80, the same cartridge as the Unicel C-7470 and Filbur FC-1976. The four-pack exists because the Clean & Clear Plus 320 takes four cartridges per system.

Specifications

Length	20 1/16 in
Outer diameter	7 in
Top opening	3 in
Bottom opening	3 in
Filtration area	80 sq ft
Media	4 oz polyester

These are the specs of each of the four cartridges in the pack. Together they provide 320 sq ft of filtration.

Why the four-pack is the standard order

A Clean & Clear Plus 320 runs four cartridges together. They wear at roughly the same rate and reach the end together, so the whole set gets replaced at once. PCC80-PAK4 is the packaged four for exactly that job.

Keeping all four the same age matters. One fresh cartridge working alongside three worn ones takes more than its share of the load and wears out early. Replacing the set together avoids that.

How to verify the four-pack is right for you

If your existing cartridge reads PCC80, or any equivalent number, and the filter is a Clean & Clear Plus 320, PCC80-PAK4 is the correct set to order. If the end cap is unreadable, confirm by dimensions: 20 1/16 inches long, 7 inches in outer diameter, 3 inch openings top and bottom.

Cross-reference

PCC80-PAK4 is a four-pack of the same cartridge sold under these numbers. The four-pack equivalents are noted:

Brand	Part number
Unicel	C-7470
Pleatco	PCC80
Filbur	FC-1976
Pentair OEM (set of 4)	179134
Pentair OEM (single)	R173573
Pentair / Pac Fab (single)	178580
Pentair OEM	817-0081
Aladdin	18005
Excel Filters	XLS-720
Baleen	AK-60433
Darlly	70804
Unicel (4-pack)	C-7470-4
Pleatco (4-pack)	PCC80-PAK4
Pleatco (EC)	PCC80-EC
Filbur (4-pack)	FC-6465